電動 / 手動壓力校正
數位壓力校正器 E-DWT-H
E-DWT-H給壓力校正帶來了新突破，它徹底改善了液壓校正的流程。基於先進的電子和機械設計，用來替換機械的通過砝碼工作的傳統活塞式壓力計。E-DWT-H堅固便攜，簡單易用，不僅可以在實驗室或計量室替代很多傳統活塞壓力計的工作，還可以攜帶至現場完成現場的計量和校正工作。這一集成式液體壓力校正器將高精密、簡單的壓力輸出控制操作與方便、實時的高精準壓力測量完美結合地在一起。
E-DWT Electronic Deadweight Tester Kits 6531/6532
• No weights to load and unload, transport or send out for calibration
• Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
• No piston-cylinder changes
• No significant sensitivity to level or vibration
• Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
• Operates in any unit of measure, switching easily from one unit to the next
• Provides real-time pressure indication with no need to know and correct for local gravity or ambient temperature
• No piston-cylinder changes
• No significant sensitivity to level or vibration
• Able to set and read any pressure value exactly, no minimum increment limited by smallest available masses; perfect for applications that require setting a nominal pressure precisely on the device under test and measuring it, such as analog gauge calibration
• Operates in any unit of measure, switching easily from one unit to the next
攜帶式壓力校正器 3130
• 產生並測量壓力至2MPa
• 內置泵產生壓力，真空至-80 kPa，正壓至2MPa
• 壓力接口可以使用外部氣壓至2 MPa
• 可以進行壓力精細調節
• 壓力測量準確度為讀數的0.025% ± 0.01% FS
• 提供24V 環路電壓
• 測量或輸出4 – 20mA 電流
• 直流電壓測量值30V
• 內部可充電NiMH 電池供電，也可以使用外接市電供電
• 兼容福祿克所有700 系列壓力模組
• 內置泵產生壓力，真空至-80 kPa，正壓至2MPa
• 壓力接口可以使用外部氣壓至2 MPa
• 可以進行壓力精細調節
• 壓力測量準確度為讀數的0.025% ± 0.01% FS
• 提供24V 環路電壓
• 測量或輸出4 – 20mA 電流
• 直流電壓測量值30V
• 內部可充電NiMH 電池供電，也可以使用外接市電供電
• 兼容福祿克所有700 系列壓力模組